MTEG Technische Import Und Export GmbH
Chamissoweg 5, D-63456 Hanau, Germany
Tel.: +49-6181-67130
Fax: +49-6181-671317
Email: info@mtegde.com
9100 Silica Analyzer
The 9100 silica analyzer is a continuous reading, wet-chemical, colorimetric analyzer for determining silica concentration
in water.
MEASURE
Value measured: Dissolved SiO2
Measurement range: 0 – 100 μg/L; 0 – 1000 μg/L; 0 – 2000 μg/L
Precision: ±1%F.S
Repeatability: <1%
Detection limit: 0.5 μg/L
SAMPLE
Channel numbers: 1 – 6
Measurement cycle: 12 min / channel
Sample pressure: ≤ 0.2 MPa
Temperature: 5 – 45 ℃
Flow rate: 50 – 300mL / min
OPERATING CONDITIONS
Ambient temperature: 5 – 45 ℃
Power supply: AC 220 V ± 22V, 50 Hz ± 1Hz
Altitude: ≤ 2000 m
Relative humidity: 10 to 80%
OUTPUTS
Outputs: 4 / 20 mA
4 / 20 mA programmable
Galvanically insulated
Maximum charge of 500 ohms
Alarm numbers: 6
MAINTENANCE
Calibration: Chemical zero, slope with calibration solution
Reagent consumption: Approximately 2L / month / reagent
Calibration solution consumption: Approximately 200 ml / calibration
DISPLAY
Programming by menu
Concentration of samples
Concentration historic
Calibration parameters historic (date, slope and offset)
WEIGHT
Analyzer without reagent canister: 25 kg
Full reagent canisters: 6 kg (three reagents)
MECHANICAL CHARACTERISTICS
Dimensions: 512 mm wide × 702 mm high × 220 mm deep
Mounting types: Panel