MTEG Technische Import Und Export GmbH
Chamissoweg 5, D-63456 Hanau, Germany
Tel.: +49-6181-67130
Fax: +49-6181-671317
Email: info@mtegde.com
8100 Conductivity Analyzer
8100 conductivity analyzer is an on-line conductivity monitor with microprocessor. The instrument mainly consists
of electrode, measurement chamber and electronic unit. It is widely used for constant detecting conductivity of boiler
feedwater, condensate water and pure water.
MEASURE
Measurement range: 0.002 – 30.00 μS/cm (electrode of 0.01);0.020 – 300.00 μS/cm (electrode of 0.10);0.200 – 3000 μS/cm (electrode of 1.00)
Display resolution : 0.001 μS/cm (electrode of 0.01);0.01 μS/cm (electrode of 0.10);0.1 μS/cm (electrode of 1.00) 0.1 °C
Precision: ± 1.5% FS; ± 0.5 °C
Repeatability: 0.7% FS
Automatic temperature compensation range: 0 – 60 ℃
Temperature probe: NTC 2.252 k ohm
OPERATING CONDITION
Ambient temperature: 0 – 50℃
Relative humidity: < 85%
Power supply: AC 220V ±22 V, 50 Hz ± 1Hz
Altitude: ≤ 2000 m
MEASURE CHAMBER / PROBE
Pressure: ≤ 0.5 MPa
Cable length: 10 m
Flow: 100 to 400 ml / min
ANALOGUE OUTPUT
Output signals: 1 galvanically outputs insulated
Type: 4 – 20 mA
Maximum load: 500 Ω
Accuracy: 0.05 mA
ALARMS
Alarm number: 2
Breaking power (ohmic overcharge): 240 V AC, 3 A max; 28 V DC, 6 A max
RS485
Baud rate: 4800, 9600, 115200
PROGRAMMING
Language: English
Display: 4.3″ Color LCD (480×272 pixels)
Memorizer: data of 1 month (1 point / 5 mins)
MECHANICAL CHARACTERISTICS
Dimensions: Panel: 160 mm wide × 160 mm high × 154 mm deep
Mounting types: Panel (trepanning dimension: 138 mm × 138 mm)
Weight: 2.5 kg
Tightness: IP65