MTEG Technische Import Und Export GmbH
Chamissoweg 5, D-63456 Hanau, Germany
Tel.: +49-6181-67130
Fax: +49-6181-671317
Email: info@mtegde.com
6300 Total Nitrogen Analyzer
The 6300 total nitrogen analyzer is a continuous reading colorimetric analyzer for determining total nitrogen concentration in water. Analysis is accomplished by using the UV Spectrophotometry method to measure the concentration.
MEASURE
Value measured: Total Nitrogen
Measurement range: 0 – 10 mg/L; 0 – 100 mg/L; 0 – 200 mg/L
Precision: ±10%F.S; ±5%F.S
Repeatability: <2%
Detection limit: 0.1 mg/L
SAMPLE
Channel numbers: 1
Measurement cycle: 25 min
Temperature: 5 – 45 ℃
Flow rate: 50 – 300mL / min
OPERATING CONDITIONS
Ambient temperature: 5 – 45 ℃
Power supply: AC 220 V ± 22V, 50 Hz ± 1Hz
Altitude: ≤ 2000 m
Relative humidity: 10 to 80%
OUTPUTS
Outputs: 4 / 20 mA
4 / 20 mA programmable
Galvanically insulated
Maximum charge of 500 ohms
MAINTENANCE
Calibration: Chemical zero, slope with calibration solution
Reagent consumption: Approximately 2L / month / reagent
Calibration solution consumption: Approximately 10 ml / calibration
DISPLAY
Programming by menu
Concentration of samples
Concentration historic
Calibration parameters historic (date, slope and offset)
WEIGHT
Analyzer without reagent canister: 25 kg
MECHANICAL CHARACTERISTICS
Dimensions: 512 mm wide × 702 mm high × 220 mm deep
Mounting types: Panel