8500 Acid-Alkali-Salt Analyzer

    8500 Acid-Alkali-Salt analyzer is a new non-contact continuous on-line monitoring device through the electrode sensor in a solution inducing current in a closed loop to calculate the conductivity of the solution by measuring the current and to get the concentration of acid, alkali and salt through the value of conductivity.

MEASURE RANGE

Measurement range: 0 – 1000 μg/L; 0 – 60 ℃

Conductivity: 0~50; 0~200; 0~500; 0~1000; 0~2000 （mS/cm）

Hydrochloric acid: 0~5%; 0~10%; 25~40%

Sulphuric acid: 0~25%; 35~80%; 96~99.5%

Nitric acid: 0~25%; 35~50%

Sodium hydrate: 0~5%; 0~10%; 25~40%

Salting liquor: 0~30%

Parameter

Precision: 2.0

Temperature compensation range: 0 – 60 ℃

Temperature compensation range: (0-9.99)%/℃

Maximum temperature of probe: 80℃

Maximum pressure of probe: 0.5×10⁵Pa

OPERATING CONDITION

Ambient temperature: 0 – 50 ℃

Relative humidity: < 85%

Power supply: AC 220V ±22 V, 50 Hz ± 1Hz

Altitude: ≤ 2000 m

Flow: 100 to 400 ml / min

CALIBRATION

Calibration type: 2 points

ANALOGUE OUTPUT

Output signals: 1 galvanically outputs insulated

Type: 4 – 20 mA

Maximum load: 500 Ω

ALARMS

Alarm number: 2

Breaking power (ohmic overcharge): 240 V AC, 3 A max; 28 V DC, 6 A max

RS485

Baud rate: 300--19200

PROGRAMMING

Language: English

Display: 4.3″ Color LCD (480×272 pixels)

Memorizer: Data of 30 days (1 point / 5 mins)

MECHANICAL CHARACTERISTICS

Dimensions: Panel: 444 mm wide × 630 mm high × 183 mm deep

Weight: 15 kg (Panel)

Tightness: IP65