MTEG Technische Import Und Export GmbH
Chamissoweg 5, D-63456 Hanau, Germany
Tel.: +49-6181-67130
Fax: +49-6181-671317
Email: info@mtegde.com
8200 pH Analyzer
8200 pH analyzer is designed for measuring pH on-line. The analyzer is widely used for continuous monitoring
pH of aqueous solution in power plants, chemical industry, environment protection fields, semi-conductor industry,
pharmaceutical industry and other industries. It is also applicable for measuring pH of make-up water, saturated water,
condensation water, boiler water of power plants or other high purified water and normal water.
MEASURE
Measurement range: 0 – 14 pH; 0 – 60 ℃
Display resolution: 0.01 pH; 0.1 ℃
Precision: ± 0.05 pH; ± 0.5 °C
Repeatability: 0.02pH/24h
Automatic temperature compensation range: 0 – 60 ℃
Sensor inputs: Potential Signal
Input impedance: ≥ 3×1014 Ω
Temperature probe: NTC 2.252 k ohm
OPERATING CONDITION
Ambient temperature: 0 – 50 ℃
Relative humidity: < 85%
Power supply: AC 220V ±22 V, 50 Hz ± 1Hz
Altitude: ≤ 2000 m
MEASURE CHAMBER / PROBE
Pressure: ≤ 0.6 MPa
Cable length: 8 m
Flow: 100 to 400 ml / min
CALIBRATION
Calibration type: 2 points
ANALOGUE OUTPUT
Output signals: 1 galvanically output insulated
Type: 4 – 20 mA
Maximum load: 500 Ω
Accuracy: 0.05 mA
ALARMS
Alarm number: 2
Response time: 10 ms
RS485
Baud rate: 4800, 9600, 115200
PROGRAMMING
Language: English
Display: 4.3″ Color LCD (480×272 pixels)
Memorizer: data of 1 month (1 point / 5 mins)
MECHANICAL CHARACTERISTICS
Dimensions: Panel: 160 mm wide × 160 mm high × 154 mm deep
Mounting types: Panel (trepanning dimension: 138 mm × 138 mm)
Weight: 2.5 kg Tightness: IP65