MTEG Technische Import Und Export GmbH
Chamissoweg 5, D-63456 Hanau, Germany
Tel.: +49-6181-67130
Fax: +49-6181-671317
Email: info@mtegde.com
9400 Copper Analyzer
9400 copper analyzer is a continuous reading colorimetric analyzer for determining copper concentration in water.
MEASURE
Value measured: Copper
Measurement range: 0 – 1 mg/L; 0 – 10 mg/L
Precision: ± 5% FS; ± 2% FS
Repeatability: <2%
Detection limit: 0.01 μg/L
SAMPLE
Channel numbers: 1 
Measurement cycle: 15 min
Temperature: 5 – 45℃
Flow rate: 50 – 300 mL / min
OPERATING CONDITIONS
Ambient temperature: 5 – 45℃
Power supply: AC 220 V ± 22V, 50 Hz ± 1Hz
Altitude: ≤ 2000 m
Relative humidity: 10 to 80%
OUTPUTS
Outputs: 4 / 20 mA
4 / 20 mA programmable
Galvanically insulated
Maximum charge of 500 ohms
MAINTENANCE
Calibration: Chemical zero, slope with calibration solution
Reagent consumption: Approximately 2L / month / reagent
Calibration solution consumption: Approximately 20 ml / calibration
DISPLAY
Programming by menu
Concentration of samples
Historic concentration
Historic calibration parameters (date, slope and offset)
WEIGHT
Analyzer without reagent canister: 25 kg
MECHANICAL CHARACTERISTICS
Dimensions: 512 mm wide × 702 mm high × 220 mm deep
Mounting types: Panel