MTEG Technische Import Und Export GmbH
Chamissoweg 5, D-63456 Hanau, Germany
Tel.: +49-6181-67130
Fax: +49-6181-671317
Email: info@mtegde.com
9800 Total Hardness Analyzer
9800 total hardness analyzer is a continuous reading colorimetric analyzer for determining hardness concentration in water with the method of titration.
MEASURE
Measurement range: 0 – 1.0 mg/L; 0 – 100 mg/L
Precision: ±5%F.S
Repeatability: <2%
Detection limit: 0.01 mg/L (Calculated by CaCo3)
SAMPLE
Channel numbers: 1
Measurement cycle: 15 min
Temperature: 5 – 45℃
Flow rate: 50 – 300 mL / min
OPERATING CONDITIONS
Ambient temperature: 5 - 45℃
Power supply: AC 220 V ± 22V, 50 Hz ± 1Hz
Altitude: ≤ 2000 m
Relative humidity: 10 to 80%
OUTPUTS
Outputs: 4 / 20 mA
4 / 20 mA programmable
Galvanically insulated
Maximum charge of 500 ohms
MAINTENANCE
Calibration: Chemical zero, slope with calibration solution
Reagent consumption: Approximately 2L / month / reagent
Calibration solution consumption: Approximately 200 ml / calibration
DISPLAY
Programming by menu
Concentration of samples
Concentration historic
Calibration parameters historic (date, slope and offset)
WEIGHT
Analyzer without reagent canister: 25 kg
MECHANICAL CHARACTERISTICS
Dimensions: 512 mm wide × 702 mm high × 220 mm deep
Mounting types: Panel